Publications by the researcher in collaboration with ALBERT ORIOL CASTELL CASOL (75)

2017

  1. High density polyethylene spheres with PCM for domestic hot water applications: Water tank and laboratory scale study

    Journal of Energy Storage, Vol. 13, pp. 262-267

2016

  1. Experimental evaluation of a concrete core slab with phase change materials for cooling purposes

    Energy and Buildings, Vol. 116, pp. 411-419

  2. Experimental study of an active slab with PCM coupled to a solar air collector for heating purposes

    Energy and Buildings, Vol. 128, pp. 12-21

  3. Thermal assessment of extensive green roofs as passive tool for energy savings in buildings

    Renewable Energy, Vol. 85, pp. 1106-1115

  4. Thermal characterization of buildings from the monitoring of the AC system consumption

    Energy and Buildings, Vol. 116, pp. 59-68

  5. Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration as passive system

    Renewable Energy, Vol. 85, pp. 1334-1356

2015

  1. A simple model to predict the thermal performance of a ventilated facade with phase change materials

    Energy and Buildings, Vol. 93, pp. 137-142

  2. Control of a PCM ventilated facade using reinforcement learning techniques

    Energy and Buildings, Vol. 106, pp. 234-242

  3. Energy performance of a ventilated double skin facade with PCM under different climates

    Energy and Buildings, Vol. 91, pp. 37-42

  4. PCM incorporation in a concrete core slab as a thermal storage and supply system: Proof of concept

    Energy and Buildings, Vol. 103, pp. 70-82

  5. The thermal behaviour of extensive green roofs under low plant coverage conditions

    Energy Efficiency, Vol. 8, Núm. 5, pp. 881-894

  6. Thermal behaviour of insulation and phase change materials in buildings with internal heat loads: experimental study

    Energy Efficiency, Vol. 8, Núm. 5, pp. 895-904

2014

  1. An effectiveness-NTU technique for characterising a finned tubes PCM system using a CFD model

    Applied Energy, Vol. 131, pp. 377-385

  2. Design of a prefabricated concrete slab with PCM inside the hollows

    Energy Procedia

  3. Energetic performance of a VDSF with CPM under different weather conditions

    Materials Science and Technology Conference and Exhibition 2014, MS and T 2014

  4. Environmental performance of recycled rubber as drainage layer in extensive green roofs. A comparative Life Cycle Assessment

    Building and Environment, Vol. 74, pp. 22-30

  5. Green roofs as passive system for energy savings in buildings during the cooling period: use of rubber crumbs as drainage layer

    Energy Efficiency, Vol. 7, Núm. 5, pp. 841-849

  6. Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review

    Renewable and Sustainable Energy Reviews, Vol. 29, pp. 394-416

  7. Life cycle assessment of a ventilated facade with PCM in its air chamber

    Solar Energy, Vol. 104, pp. 115-123

  8. Modeling phase change materials behavior in building applications: Comments on material characterization and model validation

    Renewable Energy, Vol. 61, pp. 132-135