Publicaciones en las que colabora con MARCO MEDRANO MARTORELL (43)

2016

  1. Reducing the Life Cycle Environmental Impact of Buildings Following a Simulation-Optimization Approach

    Advances in Energy Systems Engineering (Springer International Publishing), pp. 823-839

2015

  1. Multi-objective optimization of thermal modelled cubicles considering the total cost and life cycle environmental impact

    Energy and Buildings, Vol. 88, pp. 335-346

  2. Optimización multi-objetivo de cubículos: minimización del coste y del impacto ambiental

    IX Congreso Nacional de Ingeniería Termodinámica: libro de actas. Cartagena, 3 al 5 de junio 2015 (Universidad Politécnica de Cartagena), pp. 583-589

2011

  1. Asssesment of the benefits of employing thermal energy storage in Spain, Germany and Europe

    30th ISES Biennial Solar World Congress 2011, SWC 2011

  2. Asssesment of the benefits of employing thermal energy storage in Spain, Germany and Europe

    30th ISES Biennial Solar World Congress 2011, SWC 2011

  3. Design and performance of energy-efficient solar residential house in Andorra

    Applied Energy, Vol. 88, Núm. 4, pp. 1343-1353

  4. Dynamic thermal performance of alveolar brick construction system

    Energy Conversion and Management, Vol. 52, Núm. 7, pp. 2495-2500

  5. Overview of thermal energy storage (TES) potential energy savings and climate change mitigation in Spain and Europe

    Applied Energy, Vol. 88, Núm. 8, pp. 2764-2774

2010

  1. Dimensionless numbers used to characterize stratification in water tanks for discharging at low flow rates

    Renewable Energy, Vol. 35, Núm. 10, pp. 2192-2199

  2. Disseny, implementació i avaluació de l’inquiry based learning en l’ensenyament d’enginyeria tècnica industrial de la UDL

    VI CIDUI: Nuevos espacios de calidad en la educación superior: un análisis comparado y de tendencias ([S.l : s.n.], 2010), pp. 5131-5166

  3. Economic viability of a molten carbonate fuel cell working with biogas

    Journal of Fuel Cell Science and Technology, Vol. 7, Núm. 5, pp. 0510051-0510057

  4. Economic viability of using biogas from tannery wastes in molten carbonate fuel cells

    Journal of the Society of Leather Technologists and Chemists, Vol. 94, Núm. 3, pp. 93-97

  5. Effect of microencapsulated phase change material in sandwich panels

    Renewable Energy, Vol. 35, Núm. 10, pp. 2370-2374

  6. Experimental study of using PCM in brick constructive solutions for passive cooling

    Energy and Buildings, Vol. 42, Núm. 4, pp. 534-540

  7. Experimental study on the performance of insulation materials in Mediterranean construction

    Energy and Buildings, Vol. 42, Núm. 5, pp. 630-636

  8. Experimental study on the perfotmance of buildings with different insulation materials

    PORTUGAL SB10: SUSTAINABLE BUILDING AFFORDABLE TO ALL - LOW COST SUSTAINABLE SOLUTION

  9. Life Cycle Assessment of the inclusion of phase change materials (PCM) in experimental buildings

    Energy and Buildings, Vol. 42, Núm. 9, pp. 1517-1523

  10. Material flow analysis for reaching a sustainable model of the building sector

    PORTUGAL SB10: SUSTAINABLE BUILDING AFFORDABLE TO ALL - LOW COST SUSTAINABLE SOLUTION

  11. State of the art on high temperature thermal energy storage for power generation. Part 1-Concepts, materials and modellization

    Renewable and Sustainable Energy Reviews, Vol. 14, Núm. 1, pp. 31-55

  12. State of the art on high-temperature thermal energy storage for power generation. Part 2-Case studies

    Renewable and Sustainable Energy Reviews, Vol. 14, Núm. 1, pp. 56-72