Publicaciones (31) Publicaciones de JOAN ROCA ENRICH

2019

  1. Development of an easily adaptable three-point hitch dynamometer for agricultural tractors. Analysis of the disruptive effects on the measurements

    Soil and Tillage Research, Vol. 194

2018

  1. Efficiency analysis of a multiple axle vehicle with hydrostatic transmission overcoming obstacles

    Vehicle System Dynamics, Vol. 56, Núm. 1, pp. 55-77

  2. Surgical dynamometer to simultaneously measure the tension forces and the distance between wound edges during the closure of a laparotomy

    Sensors (Switzerland), Vol. 18, Núm. 1

2014

  1. Influence of the transmission configuration of a multiple axle vehicle on the obstacle surmounting capacity

    Vehicle System Dynamics, Vol. 52, Núm. 9, pp. 1191-1210

2013

  1. Efficiency sensitivity analysis of a hydrostatic transmission for an off-road multiple axle vehicle

    International Journal of Automotive Technology, Vol. 14, Núm. 1, pp. 151-161

2012

  1. Active bogies and chassis levelling for a vehicle operating in rough terrain

    Journal of Terramechanics, Vol. 49, Núm. 3-4, pp. 161-171

  2. Analysis of a hydrostatic transmission driveline for its use in off-road multiple axle vehicles

    Journal of Terramechanics, Vol. 49, Núm. 5, pp. 245-254

2011

  1. Comparison of different bogie configurations for a vehicle operating in rough terrain

    Journal of Terramechanics, Vol. 48, Núm. 1, pp. 75-84

2010

  1. Effect of microencapsulated phase change material in sandwich panels

    Renewable Energy, Vol. 35, Núm. 10, pp. 2370-2374

2009

  1. Experimental evaluation of commercial heat exchangers for use as PCM thermal storage systems

    Applied Energy, Vol. 86, Núm. 10, pp. 2047-2055

2008

  1. Natural convection heat transfer coefficients in phase change material (PCM) modules with external vertical fins

    Applied Thermal Engineering, Vol. 28, Núm. 13, pp. 1676-1686

2007

  1. Improve thermal comfort in concrete buildings by using phase change material

    Proceedings of the Energy Sustainability Conference 2007

  2. Use of alternative energy sources in tanneries

    Journal of the Society of Leather Technologists and Chemists, Vol. 91, Núm. 3, pp. 93-101

  3. Use of microencapsulated phase change materials in building applications

    Thermal Performance of the Exterior Envelopes of Whole Buildings

2006

  1. Effect of using external vertical fins in phase change material modules for domestic hot water tanks

    Renewable Energy and Power Quality Journal, Vol. 1, Núm. 4, pp. 118-123

  2. Experimentation with a water tank including a PCM module

    Solar Energy Materials and Solar Cells, Vol. 90, Núm. 9, pp. 1273-1282

  3. Modelization of a water tank including a PCM module

    Applied Thermal Engineering, Vol. 26, Núm. 11-12, pp. 1328-1333

  4. Use of phase-change materials in solar domestic hot water tanks

    ASHRAE Transactions

2005

  1. Design, dynamic simulation and experimental tests of leg mechanism and driving system for a hexapod walking robot

    CLIMBING AND WALKING ROBOTS

  2. Diseño de un encapsulador plástico para PCM (phase change material) en edificios

    IV Jornadas Nacionales de Ingeniería Termodinámica: Logroño, 2 y 3 de junio de 2005. Ponencias