Publicaciones en las que colabora con JOAN IGNASI ROSELL URRUTIA (29)

2024

  1. Impact of DC-DC Converters on the Energy Performance of a Dense Concentrator PV Array under Nonuniform Irradiance and Temperature Profiles

    Energies, Vol. 17, Núm. 5

2023

  1. Self-adaptive flow regulation through shape memory alloy valves for microelectronics cooling

    InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM

2022

  1. Design and test of shape memory alloy fins for self-adaptive liquid cooling device

    Applied Thermal Engineering, Vol. 206

  2. Numerical evaluation of bimetallic self-Adaptive fins acting as flow disturbing elements inside a microchannel

    InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM

2021

  1. Thermal analysis of a MEMS-based self-adaptive microfluidic cooling device

    Micromachines, Vol. 12, Núm. 5

2020

  1. Experimental Validation of a Smart Microfluidic Cell Cooling Solution

    InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM

2019

  1. Experimental characterization of a self-adaptive shape memory alloy cooling approach to regulate temperature under varying heat loads

    International Journal of Heat and Mass Transfer, Vol. 139, pp. 632-640

  2. Impact of the self-adaptive valve behavior on an array of microfluidic cells under unsteady and non-uniform heat load distributions

    Journal of Applied Fluid Mechanics, Vol. 12, Núm. Specialissue, pp. 29-36

  3. Impact of thermally sensitive self-adaptive structures on the performance of a cooling device

    Proceedings of 30th International Conference on Adaptive Structures and Technologies, ICAST 2019

2018

  1. Assessment of the impact of non-uniform illumination and temperature profiles on a dense array CPV receiver performance

    Solar Energy, Vol. 171, pp. 863-870

  2. Dense array CPV receivers: Impact of the cooling device on the net PV output for different illumination profiles

    AIP Conference Proceedings

  3. Thermostatic Fins for Spatially and Temporally Adaptive Microfluidic Cooling

    THERMINIC 2018 - 24th International Workshop on Thermal Investigations of ICs and Systems, Proceedings

2017

  1. Distributed and self-adaptive microfluidic cell cooling for CPV dense array receivers

    AIP Conference Proceedings

  2. Microfluidic cell cooling system for electronics

    THERMINIC 2017 - 23rd International Workshop on Thermal Investigations of ICs and Systems

  3. Smoothing effect of the thermal interface material on the temperature distribution in a stepwise varying width microchannel cooling device

    Heat and Mass Transfer/Waerme- und Stoffuebertragung, Vol. 53, Núm. 9, pp. 2987-2997

2015

  1. Nozzle to plate optimization of the jet impingement inlet of a tailored-width microchannel heat exchanger

    Experimental Thermal and Fluid Science, Vol. 67, pp. 81-87

  2. Stepwise varying width microchannel cooling device for uniform wall temperature: Experimental and numerical study

    Applied Thermal Engineering, Vol. 78, pp. 30-38

2014

  1. Outdoor test of a hybrid jet impingement/micro-channel cooling device for densely packed concentrated photovoltaic cells

    Solar Energy, Vol. 107, pp. 113-121

  2. Uniform temperature profile for a dense array CPV receiver under non uniform illumination profile

    AIP Conference Proceedings

2013

  1. Experimental demonstration of a tailored-width microchannel heat exchanger configuration for uniform wall temperature

    Journal of Physics: Conference Series