Departamento
- Enginyeria Industrial i de l´Edificació
Publicaciones (29) Publicaciones en las que ha participado algún/a investigador/a
2005
-
A methodology to extract dynamic compact thermal models under time-varying boundary conditions: Application to a thermopile based IR sensor
Microsystem Technologies
-
A wavelet multiscale based method to separate the high and low frequency components of mechanomyographic signals
Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings
-
Absorption of water vapour in the falling film of water-(LiBr + LiI + LiNO3 + LiCl) in a vertical tube at air-cooling thermal conditions
International Journal of Thermal Sciences, Vol. 44, Núm. 5, pp. 491-498
-
An approach to the simulation of PCMs in building applications using TRNSYS
Applied Thermal Engineering, Vol. 25, Núm. 11-12, pp. 1796-1807
-
An efficient 2-stage fractional charge pump based on frequency regulation
Proceedings of SPIE - The International Society for Optical Engineering
-
An electron mobility independent pulse skipping regulator for a programmable CMOS charge pump
Proceedings - IEEE International Symposium on Circuits and Systems
-
Análisis exergético de varios ciclos de absorción de agua-bromuro de litio
IV Jornadas Nacionales de Ingeniería Termodinámica: Logroño, 2 y 3 de junio de 2005. Ponencias
-
Assessing the effect of web-based learning tools on student understanding of stoichiometry using knowledge space theory
Journal of Chemical Education, Vol. 82, Núm. 8, pp. 1251-1262
-
Center-pivot automatization for agrochemical use
Computers and Electronics in Agriculture
-
Design, dynamic simulation and experimental tests of leg mechanism and driving system for a hexapod walking robot
CLIMBING AND WALKING ROBOTS
-
Diseño de un encapsulador plástico para PCM (phase change material) en edificios
IV Jornadas Nacionales de Ingeniería Termodinámica: Logroño, 2 y 3 de junio de 2005. Ponencias
-
Diseño y construcción de un sistema de aire acondicionado para realizar prácticas
IV Jornadas Nacionales de Ingeniería Termodinámica: Logroño, 2 y 3 de junio de 2005. Ponencias
-
Diseño y validación de un depósito de ACS con módulos de materiales de cambio de fase (PCM) en su interior con "TRNSYS"
IV Jornadas Nacionales de Ingeniería Termodinámica: Logroño, 2 y 3 de junio de 2005. Ponencias
-
Dynamic compact thermal models with multiple power sources: Application to an ultrathin chip stacking technology
IEEE Transactions on Advanced Packaging, Vol. 28, Núm. 4, pp. 694-703
-
Exergy and structural analysis of an absorption cooling cycle and the effect of efficiency parameters
ECOS 2005 - Proceedings of the 18th International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems
-
Exergy and structural analysis of an absorption cooling cycle and the effect of efficiency parameters
International Journal of Thermodynamics, Vol. 8, Núm. 4, pp. 191-198
-
Improvement of a thermal energy storage using plates with paraffin-graphite composite
International Journal of Heat and Mass Transfer, Vol. 48, Núm. 12, pp. 2561-2570
-
Long term immersion corrosion tests on metal-PCM pairs used for latent heat storage in the 24 to 29°C temperature range
Materials and Corrosion, Vol. 56, Núm. 1, pp. 33-39
-
Measuring coverage performances of a floor cleaning mobile robot using a vision system
Proceedings - IEEE International Conference on Robotics and Automation
-
Microbiologic determinants of exacerbation in chronic obstructive pulmonary disease
Archives of Internal Medicine, Vol. 165, Núm. 8, pp. 891-897