Publications by the researcher in collaboration with Stefan Hiebler (13)

2020

  1. Experimental devices to investigate the long-term stability of phase change materials under application conditions

    Applied Sciences (Switzerland), Vol. 10, Núm. 22, pp. 1-30

2018

  1. Enthalpy-temperature plots to compare calorimetric measurements of phase change materials at different sample scales

    Journal of Energy Storage, Vol. 15, pp. 32-38

2016

  1. IEA SHC Task 42 / ECES Annex 29 - A Simple Tool for the Economic Evaluation of Thermal Energy Storages

    Energy Procedia

2014

  1. Measurement of enthalpy curves of phase change materials via DSC and T-History: When are both methods needed to estimate the behaviour of the bulk material in applications?

    Thermochimica Acta, Vol. 596, pp. 79-88

2008

  1. Determination of the enthalpy of PCM as a function of temperature using a heat-flux DSC - A study of different measurement procedures and their accuracy

    International Journal of Energy Research, Vol. 32, Núm. 13, pp. 1258-1265

2006

  1. Use of phase-change materials in solar domestic hot water tanks

    ASHRAE Transactions

2005

  1. Long term immersion corrosion tests on metal-PCM pairs used for latent heat storage in the 24 to 29°C temperature range

    Materials and Corrosion, Vol. 56, Núm. 1, pp. 33-39

2003

  1. PCM-module to improve hot water heat stores with stratification

    Renewable Energy, Vol. 28, Núm. 5, pp. 699-711

  2. Thermal performance of sodium acetate trihydrate thickened with different materials as phase change energy storage material

    Applied Thermal Engineering, Vol. 23, Núm. 13, pp. 1697-1704

2002

  1. Heat transfer enhancement in water when used as PCM in thermal energy storage

    Applied Thermal Engineering, Vol. 22, Núm. 10, pp. 1141-1151

  2. Immersion corrosion tests on metal-salt hydrate pairs used for latent heat storage in the 48 to 58 C° temperature range

    Materials and Corrosion, Vol. 53, Núm. 12, pp. 902-907

2001

  1. Immersion corrosion tests on metal-salt hydrate pairs used for latent heat storage in the 32 to 36 C temperature range

    Werkstoffe und Korrosion, Vol. 52, Núm. 2, pp. 140-146

  2. Middle term immersion corrosion tests on metalsalt hydrate pairs used for latent heat storage in the 32 to 36 °C temperature range

    Werkstoffe und Korrosion, Vol. 52, Núm. 10, pp. 748-754